NinjaTek Armadillo 3D Printer Filament
NinjaTek Armadillo is a high-performing rigid TPU filament. High toughness ratings, used for bridging with virtually no warping...
NinjaTek Cheetah 3D Printer Filament
NinjaTek Cheetah is the fastest and easiest-to-print flexible TPU filament available. Cheetah is the perfect blend of speed...
NinjaTek Chinchilla 3D Printer Filament
NinjaTek Chinchilla flexible filament is the softest, best-feeling material on the market. Create soft, long-lasting parts.
NinjaTek Eel 3D Printer Filament
NinjaTek Eel TPU 3D printing filament is one of the only conductive, static dissipative and flexible materials on...
NinjaTek NinjaFlex 3D Printer Filament
NinjaFlex TPU filament has proprietary technology that boasts a low-tack, easy-to-feed texture ideal for direct-drive extruders.
NinjaTek Armadillo 3D Printer Filament.
Superior toughness rating.
Our toughest stuff, Armadillo® is a high-performing rigid TPU filament that provides 90% higher abrasion resistance than nylon. Its toughness ratings are superior to commonly used materials, and it’s an excellent 3D printing material to use for bridging with virtually no warping issues.
Features and Benefits of Armadillo Filament
- Shore hardness = 75D
- Excellent bridging capabilities and virtually no warping
- Abrasion resistance 84% better than PLA and 60% better than ABS
- Chemical resistance to many materials.
- Consistent diameter and material properties providing reliable, high-quality prints
- No heated bed required. Build platform requires same prep as PLA.
- REACH and RoHS 3 (EU 2015/863)
Applications
Industrial Manufacturing
From prototypes to end-use parts, Armadillo’s strength and durability hold up in most applications.
Healthcare
Designers in prosthetics know our tough TPU is strong enough for wear and tear.
Sports
3D print durable, impact-resistant shoes and tough sports equipment with Armadillo.
Print Guidelines
Extruder Temperature
- 210°C – 230°C
Platform Temperature
- Room temperature to 50°C
- Glue is suggested on bed.
Print Speed
- Top and bottom layers: 20-30 mm/sec (900-1800 mm/min)
- Infill speeds: 35-60 mm/sec (2700-3600 mm/min)
- Layer 2+ use cooling fan if available.
NinjaTek 3D Printing Materials
