FreedspaceUltiMaker Tough for Method

Home / Thinglab / 3D Print, 3D Scan and Design Products / 3D Printing Materials / MakerBot 3D Printing Filament / UltiMaker Tough for Method

UltiMaker Tough Filament for Method

Durable, tough parts, office-friendly printing

UltiMaker Tough is a material that is great for mid-stage prototypes because of its ease of use and office-friendliness. An added benefit over PLA is its durability, pliability, and machinability which makes it perfect for snap fits and assemblies.

Extruder Compatibility

Makerbot Tough for Method

Support Material

MakerBot PVA
Breakaway Supports

Dimensional Accuracy

Finished part dimensional accuracy of ± 0.2mm (± 0.007in)₁

For use on: Method | Method X

Shop Now contact us

TECH SPECS	Imperial	Metric
Heat Deflection (ASTM 648, 66 psi)	125-120°F	52-49°C
Flexural Modulus (ASTM D790, 15 mm/min)	377,000 psi	2,600 MPa
Tensile Strength at yield (ASTM D638, 50 mm/min)	5,080 psi	35 MPa
Tensile Modulus (ASTM D638, 50 mm/min)	406,000 psi	2,800 MPa
Strain at Yield – Elongation (%)	>52.7%	>52.7%
Notched Impact Strength (ASTM D256)	4.12 ft-lb/in	220 J/m

UltiMaker ABS Applications

End-Use Parts

UltiMaker Tough filament was developed not only for its strength and part performance but also to overcome two of the most glaring issues that hamper ABS: warping and curling.

Prototyping

At 2X the impact strength of ABS, UltiMaker Tough™ filament offers superior durability for industrial prototyping and manufacturing aid applications. With tensile and flexural strength that match ABS, designers and engineers can create parts that hold up under all types of stress.